Transfer HDPE Matte Film Label (For Rough and Cold Surfaces)

Matte white HDPE film • Designed for cold, rough and slightly dirty surfaces

General Description

This label with a 95 µm matte HDPE (high-density PE) film surface is designed for
cold, rough, and slightly dirty surfaces. Typical applications include labeling on
wood/timber surfaces. The backing is siliconized glassine paper.
Total thickness 204 µm (±10%, ISO 534).

Delivers high-quality printing with resin and wax-resin ribbons in thermal transfer systems.
Minimum application temperature is 0 °C. Typical service temperature range after application is
−40 °C to 70 °C.

Adhesive

Type: Hotmelt rubber-based high-tack adhesive
Properties: Very high initial tack and peel strength; excellent adhesion on
rough and slightly dirty surfaces (e.g., construction materials, wood)

Liner (Release Layer)

Material: White, super-calendered, siliconized glassine paper (no residue transfer)
Grammage: 70 g/m² (ISO 536)
Thickness: 63 µm (ISO 534)

Lamination

Total Thickness: 204 µm ±10% (ISO 534)

Performance Data

Initial Tack: 35 N/25 mm FTM 9, glass
Peel Adhesion: 21 N/25 mm FTM 2, steel, 24 h
Min. Application Temperature: 0 °C
Service Temperature: −40 °C ~ 70 °C

Applications

Labeling of timber and construction materials
Cold storage, outdoor and slightly dirty surfaces
Rough/textured plastic and wooden surfaces

Adhesive Options

Adhesive Code: 52 — Hotmelt Rubber for Cold Surfaces

Formulated for dirty, rough, and cold surfaces. Provides very high initial tack and peel resistance.
Especially reliable for construction and timber applications exposed to low temperatures.